Versions Compared

Old Version 5

changes.mady.by.user Ann Base

Saved on

compared with

New Version 6

changes.mady.by.user Ann Base

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: New name

A Certificate Authority (CA) issues client certificates used in authentication. In order to authenticate a user, a CA certificate is needed.

This article describes how to add certificate authority, server certificate, and client certificate for the Smart ID Digital Access component (Hybrid Access Gateway) administration interface.

Prerequisites

Expand
titlePrerequisites
  • The certificate authority, server certificate, and client certificate files must be available.

Step-by-step instruction

Expand
titleLog in to Hybrid Digital Access Gateway administration interfaceAdmin
  1. Log in to the Hybrid Access Gateway administration interface with your admin userDigital Access Admin with an administrator account.


Expand
titleAdd certificate authority
  1. In the Hybrid Digital Access Gateway administration interfaceAdmin, go to Manage System.
  2. Click Certificates > Add Certificate Authority...
  3. Check Enable Certificate Authority.
  4. Enter a Display Name used to identify the certificate authority.
  5. Browse to and select the certificate authority file.
  6. Decide if revocation control shall be used or not.
  7. Click Finish.


Expand
titleAdd server certificate
  1. In the Hybrid Digital Access Gateway administration interfaceAdmin, go to Manage System.
  2. Click Certificates > Add Server Certificate...
  3. Enter a Display Name used to identify the server certificate.
  4. Browse to and select the server Certificate file.

  5. Browse to and select the server Key file.

    Note

    The server certificate must be in PKCS#8 format.


  6. If the information is encrypted, enter Password.
  7. Make other selections if applicable.
  8. Select the created CA Certificates.
  9. Click Save.


Expand
titleAdd client certificate
  1. In the Hybrid Digital Access Gateway administration interfaceAdmin, go to Manage System.
  2. Click Certificates > Manage Client Certificate Settings...

  3. Enter a Display Name used to identify the client certificate.

  4. Browse to and select the client Certificate file.

  5. Browse to and select the client Key file.

  6. If the information is encrypted, enter Password.

  7. Click Save.


Expand
titleSelect server certificate for access point
  1. In the Hybrid Digital Access Gateway administration interfaceAdmin, go to Manage System.
  2. Click Access Points.
  3. Add or edit an access point.
  4. In Server Certificate, select the server certificate you just added.
  5. Click Save.


Related information