...
...
...
...
...
...
...
...
...
...
...
...
...
...
| Info |
|---|
This article is valid for Smart ID 21.04 and later. |
This article describes how to configure the Demo service that functions as a PACS simulator with Smart ID Physical Access component in Smart ID Identity Manager.
If Physical Access is being used with the Demo service, all administration of Users, Access Tokens and Entitlements (besides defining them) should be done in Identity Manager.
...
The following prerequisites apply:
Physical Access and the PACS demo Docker container/service are installed. See Deploy Smart ID.
The message queue server must be running.
Configure Demo service data fields
The Demo service data is configured in the configuration table in the Physical Access database. All configuration is cached when the service starts so any configuration changes will require the service to be restarted in order to take effect.
Configure database
For information about how to connect to a PACS system,
...
see Connect to a PACS system in PACS admin panel.
For information about group: messagingqueue, see Physical Access database - common parameters.
group: export
key | Data type | Required or Optional | Description |
|---|---|---|---|
userfieldmappings | string | Optional |
User column fields can be sent by adding the configuration |
The following table shows sample configuration for userfieldmappings:
system | key | value | group | index |
|---|---|---|---|---|
DEMO | userfieldmappings | user.title, additionalFields. title | export | 0 |
group: demo.card.mapping.default
This group defines how to export card numbers by default, when a card’s layout does not have a specific mapping.
key | Data type | Required or Optional | Description |
|---|---|---|---|
layoutIdentifier | string | Required | The name of the card layout to match (case insensitive) for this mapping. Each layout may only be mapped once. |
cardNumberIdentifier | string | Optional | The default identifier type to read card numbers. Default: |
format | string | Optional | The format that the card number should be converted into before exporting it to the Demo service. Valid values: Default: |
length | int | Optional | The length that the card number should be trimmed (leading digits) or padded (with leading zeroes) to after converting it. Default: 9 |
group: demo.card.mapping
This group contains compound configuration elements using the config_index column. For each unique config_index value in this group, each key defined below must be defined exactly once. Note that this group is not required as a whole, and should only be used if you have specific requirements for one or more card layouts.
key | Data type | Required or Optional | Description |
|---|---|---|---|
layout | string | Optional | The name of the card layout to match (case insensitive) for this mapping. Each layout may only be mapped once. |
cardNumberIdentifier | string | Optional | This indicates the identifier for card number. |
format | string | Optional | The format that the card number should be converted into before exporting it to the Demo Service. Valid values: |
length | int | Optional | The length that the card number should be trimmed (leading digits) or padded (with leading zeroes) to after converting it. |
Example
Example configuration for card mapping settings:
system | key | value | group | index |
|---|---|---|---|---|
DEMO | layout | Linear | demo.card.mapping | 1 |
DEMO | cardNumberIdentifier | mifare | demo.card.mapping | 1 |
DEMO | length | 9 | demo.card.mapping | 1 |
DEMO | format | Linear | demo.card.mapping | 1 |
DEMO | layout | skip | demo.card.mapping | 2 |
DEMO | cardNumberIdentifier | mifare | demo.card.mapping | 2 |
DEMO | length | 9 | demo.card.mapping | 2 |
DEMO | format | skip | demo.card.mapping | 2 |
Restart service
Restart the PACS Demo service:
...
Restart Physical Access Demo service
| Code Block |
|---|
cd <SMARTIDHOME>/compose/physicalaccess docker-compose restart smartid-pa-demo |
...