This use case describes how to block the PIN of a card right after personalization, for security reasons, that is, the card can not be used further. The user has to unblock the card in order to be able use it.

1. Define like this in the encoding description:
   

   Code Block
   [Application_B] BlockCard=true

   Description of the elements
   

   Element	Description
   BlockCard=true	Triggers the card/PIN blocking mechanism

    

Online Unblocking with PUK

For unblocking via standard P11 you can use the InitialPUK to set a new PIN (and optionally a new PUK, unless that is prevented by the card profile).

1. Define like this in the encoding description:
   

   Code Block
   [Description] SetPIN=true PIN=#123456 InitialPUK=#12345678 PUK=#13579

   Description of the elements
   

   Element	Description
   SetPIN=true	Triggers to set PIN and/or PUK, that is, the Unblocking use case.
   PIN=...	Defines the new PIN. (Theoretically also optional if you just want to set a new PUK, however, in the Unblocking use case, it is reasonable to set the new PIN here, for example, by "PIN=!FROM_USER_DIALOG_2_FIELD")
   InitialPUK=...	Defines the old PUK.  Mandatory, except for Gemalto cards and pre-initialized CardOS cards that use a CardManagerKey instead
   PUK=...	If you want to define a new PUK. (Optional, changing the PUK might not always be supported depending on the card profile)

   
   

Online Unblocking with CardManagerKey

The following applies to Gemalto middlewares and card, as well as to specially pre-initialized CardOS cards used with the CardOS 5.3 middleware (5.4W14 or later recommended).

It does not apply to offline-unblockable cards created with the Cryptovision middleware, which uses a different approach (see below).

Instead of InitialPUK / PUK,, the CardManagerKey attribute plus its NewCardManagerKey counterpart are used in the encoding descriptions.

The following example uses the current key to set the PIN as well as setting a new key:

1. Define like this in the encoding description:
   

   Code Block
   [Fields] ADMIN_KEY= NEW_ADMIN_KEY= PIN= [Description] SetPIN=true PIN=PIN CardManagerKey=ADMIN_KEY NewCardManagerKey=NEW_ADMIN_KEY

   Description of the elements
   

   Element	Description
   SetPIN=true	Triggers to set PIN and/or CardManagerKey, that is, the Unblocking use case.
   PIN=...	Defines the new PIN. (Theoretically also optional if you just want to set a new PUK, however, in the Unblocking use case, it is reasonable to set the new PIN here, for example, by "PIN=!FROM_USER_DIALOG_2_FIELD")
   CardManagerKey=...	Defines the old CardManagerKey.
   NewCardManagerKey=...	If you want to define a new CardManagerKey.

   Before you use any P11 operations on a card, make sure you first set the PIN via the CardManagerKey (like in the example code above) - once that is done, all P11 operations that require a PIN will work as usual (as long as no PUK/InitialPUK is involved as well!) and do not require the CardManagerKey.

Identity Manager supports using the Cryptovision middleware to produce cards which can be unblocked offline, for example, through Windows.

To enable this functionality in the middleware, the following registry settings have to be imported into regedit:

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\cv cryptovision\sc interface\pkcs11]
"extension"="{2B7D7904-E147-4A63-A26A-E179D2C6C30A}"

[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\cv cryptovision\sc interface\pkcs11]
"extension"="{2B7D7904-E147-4A63-A26A-E179D2C6C30A}"

The offline PIN unblocking (see Unblock PKI PIN for smart card - offline - Digital ID) is based on a shared secret (card manager key), that need to be available on the card and to the offline system, that allows an offline facility (Helpdesk Officer using Identity Manager) to support the card owner.

As the secret Identity Manager generates a 2DES key from which various other keys are then derived according to the Cryptovision specs.

Generate the card manager key

There's a predefined task for convenient creation of a correct key, see heading "Credentials: Create Minidriver Card Manager Key" in Credentials - Standard service tasks in Identity Manager.

Initialize the card

Define like this in the encoding description:

[Fields]
CARD_MANAGER_KEY=
 
[Description]
InitCRKey=true
UseCardManagerKey=true
CardManagerKey=CARD_MANAGER_KEY

Verifying card production

Once a card is produced you can use the cv act sc/interface Manager tool of the Cryptovision middleware to verify if it was produced with offline unblocking support:

• card property Minidriver capable: yes
• Challenge Response key present in Logins
• Challenge Response key present in Secret Keys