• To send a notification via SMS or email, at least one notification channel must be selected and configured. See Set up email or sms notification channel.

1. Log in to the Hybrid Access Gateway administration interface with your admin user.

The self-service provisioning is managed by displaying a QR code, either directly in a browser or in an email. Notifications by SMS or email can be sent.

To enable and customize self-service provisioning:

1. In the Hybrid Access Gateway administration interface, go to Manage Accounts and Storage.
   
2. Click Self Service > Personal Mobile Provisioning.
3. Check Enable Personal Mobile Self Service Provisioning.

4. Select one or more notification channels:

   1. To send an email with a QR code, select Enable notification by mail. If needed, change Email subject or Email message under Notification Message Customization.
      In this case, an email notification channel must be set up. See Set up email or sms notification channel.

   2. To send an SMS with a link to the QR code, select Enable notification by sms. If needed, change SMS message under Notification Message Customization.
      In this case, an SMS notification channel must be set up. See Set up email or sms notification channel.
      

   3. To generate a QR code directly in the browser, select Enable QR code generation.
      

5. Click Save.

To do self-provisioning, the user needs to authenticate with at least one other method. By adding an access rule to the provisioning page you can specify which methods that are allowed to prove the users identity.

1. In the Hybrid Access Gateway administration interface, go to Manage Resource Access.
2. Expand the Web Resource Access Point and select wa/personal/provisioning.html.
3. Click Edit Resource Path...
4. Make the required settings, for example by adding an access rule. For more information, click the ?-sign.
5. Click Save.