This article describes how to install and configure the iSecure Service, to enable integration between Nexus PRIME PACS Backend and iSecure.

iSecure is an Access Control System provided by Security Shells and managed by a GUI and the service interacts with iSecure through the web-based iSecure API. iSecure is used to integrate with all versions of the HID access controllers VertX and EDGE.

After integration, all administration of Users, Access Token and Entitlements (besides defining them) should be done in Nexus PRIME, never in iSecure.

For details on which data can be imported and exported from iSecure, see About import and export to PRIME PACS Backend.

Prerequisites

The following prerequisites apply:

PRIME PACS Backend is installed. See here.
iSecure S/W Version-E-A2.4-Unlimited CI - 60 is required.
The message queue server must be running.

Limitations & constraints

The following limitations apply:

In iSecure, only one card can be assigned per employee. If the PACS Backend service finds more than one card to one employee which matches the configuration, then the old assigned card will be replaced with the new.
Before a card can be assigned to an employee, it must be available in the iSecure system and must match the card format.
→ See the section Create Card in iSecure below.
The following employee fields in iSecure are required: Emp Code, Company, Location and Department. Emp Code shall contain any unique data from user records, other fields can either be static in the configuration or mapped as user additional fields.

Configure iSecure Service

The service is configured in the configuration table in the PACS Backend database and in the configuration file. All configuration is cached when the service starts so any configuration changes will require the service to be restarted in order to take effect.

Set parameters in the configuration file

The configuration file is named ISecureService.exe.config.

Error rendering macro 'excerpt-include' : No link could be created for 'Set parameters in PACS connector configuration file'.

Apply configuration

Error rendering macro 'excerpt-include' : No link could be created for 'Apply configuration changes in PACS connector service'.

Configure database

Error rendering macro 'excerpt-include' : No link could be created for 'Configure database in PACS admin panel'.

Error rendering macro 'excerpt-include' : No link could be created for 'PACS Backend database - messagingqueue parameters'.

group: general

key

Data type

Required or Optional

Description

updatesPerPoll

int

Optional

The maximum number of messages read from the message queue.

Default: 100

iSecureApi

string

Required

URL of the iSecure API for import and export details.

group: export

key	Data type	Required or Optional	Description
cardNumberIdentifier	string	Required	This setting defines which type of identifier to use for card number. Default: “mifare”.
empCodeField	string	Required	This setting defines which field to use for unique identification of users. It can be configured as follows. Examples: user.ssn user.[column name of user table] useradditionalfield.[Type of additional field]
companyName	string	Required	This setting defines the name of the company, which is mapped to the iSecure field Company. If a different value is to be used, then it can be configured as follows: Example: useradditionalfield.company
locationName	string	Required	This setting defines the name of the location, which is mapped to the iSecure field Location. If a different value is to be used, then it can be configured as follows: Example: useradditionalfield.location
department	string	Required	This setting defines the name of the department, which is mapped to the iSecure field Department. If a different value is to be used, then it can be configured as follows: Example: useradditionalfield.department
accessType	string	Required	This setting defines the way of access using Card Readers. The following values are available: "CardOrCardAndPin" (Default) "CardOrPin" "PinOnly"
cardFormat	string	Required	This setting specifies the available card format in the iSecure application. To not use any formatting, select “NoFormat”. Default: “NoFormat”.
subDept	string	Optional	This setting defines the name of the sub-department, which is mapped to the iSecure field Sub-Dept. If a different value is to be used, then it can be configured as follows: Example: useradditionalfield.subdepartment

Example

Example with static settings for company, location and department:

Id	Group	Key	System	Value
1	general	iSecureApi	ISecure	http://localhost/isecureapi/
2	export	cardNumberIdentifier	ISecure	mifare
3	export	empCodeField	ISecure	user.ssn
4	export	companyName	ISecure	Nexus
5	export	locationName	ISecure	Stockholm
6	export	department	ISecure	IT
7	export	accessType	ISecure	CardORCardAndPin
8	export	cardFormat	ISecure	NoFormat

Example with user additional fields for company, location and department:

Id	Group	Key	System	Value
1	general	iSecureApi	ISecure	http://localhost/isecureapi/
2	export	cardNumberIdentifier	ISecure	mifare
3	export	empCodeField	ISecure	user.ssn
4	export	companyName	ISecure	useradditionalfield.company
5	export	locationName	ISecure	useradditionalfield.location
6	export	department	ISecure	useradditionalfield.department
7	export	accessType	ISecure	CardORCardAndPin
8	export	cardFormat	ISecure	NoFormat

iSecure field mapping

The service mainly transfers user data including related access tokens and entitlement assignments. The tables below show the default field mapping.

If needed, additional fields can be configured, using the SCIM API and useradditionalfield in the database configuration.

User field mapping

By default, the following data is mapped between the USER table in the PACS Backend and the iSecure service:

SR No	PACS Backend field (Web API)	iSecure field (UI)
1	Value configured under setting empCodeField	Emp Code
2	Combination of givenName and FamilyName	Name
3	Value configured under setting companyName	Company
4	Value configured under setting Location	Location
5	Value configured under setting Department	Department
6	Value configured under setting subDept	Sub-Dept
7	Status column of user table	Status
8	Address of user from Address table	Address

Access token field mapping

By default, the following data is mapped between the ACCESSTOKEN and ACCESSTOKENIDENTIFIER tables in the PACS Backend and the iSecure service:

SR No	PACS Backend field (Web API)	iSecure field (UI)
1	Value configured under setting cardNumberIdentifier	Card Number
2	Default Configuration for cardFormat	CardFormat
3	USER-PIN (No Direct link)	Pin column of user table
4	Default Configuration for accessType	AccessType

Entitlement assignment field mapping

By default, the following data is mapped between the ENTITLEMENTASSIGNMENT table in the PACS Backend and the iSecure service:

SR No	PACS Backend field (Web API)	iSecure field (UI)
1	assigneeid (assignee -value)	Emp Code
2	ExternalId (ExternalId)	Access Groups Id (Access Groups Id, not on UI)
3	DisplayName (entitlement-DisplayName)	Access Group (Namn)

Install iSecure service

Install service

The installation file is named ISecureService.exe.

Error rendering macro 'excerpt-include' : No link could be created for 'Install PACS connector service'.

Restart iSecure service

Restart service

The service SystemId is named ISecure.

Error rendering macro 'excerpt-include' : No link could be created for 'Restart PACS connector service'.

Create card in iSecure

Before assigning a card to an employee in PRIME PACS Backend, the card must be created in iSecure.

To create a card, follow these steps:

Log in to the iSecure system:
Example: iSecure URL
```
http://localhost/isecure/Login.aspx
```
Go to Controller Setup Data > Card Inventory. Click on the + (Plus) button.
Add the card number and select a card format.
If the desired card format not available, then create the card format or select No Format. To create a card format, follow these steps:
1. Go to Controller Setup Data > Card Formats. Click on the + (Plus) button.
2. Add a name of the card format and save it.

Related information

Integrate PRIME with physical access control system

Set up integration with Security Shells iSecure for connecting to HID controllers