Renamed parameters

Some encoding description parameters were renamed with Smart ID 20.11, so you must adjust any encoding description which includes APDU scripts:

• CardOSApduFile => ApduFile
• CardOSApduResponseCodesField => ApduResponseCodesField

Two supported channels

Since Smart ID 20.11 there are two supported channels for sending APDUs within a PKI card encoding:

• PKCS#11 extension in CardOS middleware (used via Card SDK+JPKIEncoder only).
• Middleware-agnostic implementation in Smart ID Desktop App with more secure challenge/response handling (new for 20.11).

Depending on your use case and PKCS#11 middleware, you have these options for APDU encodings of PKI cards:

Middleware	Card SDK+JPKIEncoder (with printing)	Smart ID Desktop App (no printing)
CardOS
Other (for example Cryptovision, Nexus Personal Desktop Client)

• APDU scripts have to be bundled in the DSZ file that is uploaded. The file extension shall be apdu.
• When using CardOS middleware, its version needs to be at least 5.4W14, unless Smart ID Desktop App is used, which will also work with older versions.
• For APDU encodings through Nexus Card SDK, you need at least Card SDK version 5.4.0.17.

• APDU commands can either be given as full hex string or with parameterized command data read from fields.
• APDU commands have support for challenge response algorithms.
• Comments are allowed, starting with #.
• Empty lines are allowed.
• Do not do other things in the application (like requesting certificates), use dedicated applications for APDUs instead.
• Applications reference a script by filename.
• You can execute one script containing potentially multiple APDUs per application.
• Authentication with challenge/response keys via APDU.
• Format selection for most variables (hex/base64/string, hex being the default) - new in 20.11.

You can have spaces in APDU commands for better readability:

RAW[OUT]:00CA018202
RAW [OUT]: 00CA0182 02  # same as above

Smart ID 20.11 allows input and output variables (with some exceptions in PIN lines) to use a format other than hex strings.

To configure the format, set the prefix <hex> / <string> / <base64> in front of the variable name (hex is default if no prefix is given).

DYN[<base64>MY_RESULT]:00AABBCC;<string>FIELD_A+<base64>FIELD_B+FIELD_C;300 
# MY_OUTPUT will be written as base64 string							
# FIELD_A shall be interpreted as UTF-8 string							
# FIELD_B shall be interpreted as base64 string
# FIELD_C shall be interpreted as hex string (default)

The output field name is optional and can be omitted if you are not interested in the response data, for example:

RAW[]:00AABBCC 
RAW:00AABBCC   # also possible since 20.11

This format is for non-parameterized APDUs only, which are passed in full as hex-string, with the output type being configurable, see this example:

RAW:00CA018202                          # no output
RAW[MY_OUT_FIELD]:00CA018202            # output as hex, default
RAW[<hex>MY_OUT_FIELD]:00CA018202       # output as hex, explicit, since 20.11
RAW[<base64>MY_OUT_FIELD]:00CA018202    # output as base64, since 20.11
RAW[<string>MY_OUT_FIELD]:00CA018202    # output as UTF-8 string, since 20.11

This format allows for parametrization of the APDU's command data, which can be read from fields and concatenated, for example:

DYN[]:002C0001;NEW_PUK+NEW_PIN
DYN:002C0001;NEW_PUK+NEW_PIN            # skip empty brackets, since 20.11
DYN:002C0001;<hex>NEW_PUK+<hex>NEW_PIN 	# variable format, since 20.11

If a field has an empty or null value, it will resolve to an empty byte array, otherwise the field value will be parsed according to the specified input format (refer to the section "Configure format for variables").

The expected result length is given as a decimal value, for example:

DYN[OUTPUT]:00CA0188;;255
DYN[<hex>OUTPUT]:00CA0188;;255 # variable format, since 20.11

You can have just the header plus field(s) and/or result length, for example:

You can include fixed hex values (prefixed with 0x) in the command-data as well, for example:

This custom format allows for displaying a PIN dialog where the user can choose a new PIN.

Optionally input of an existing transport PIN can be requested and/or a PIN validation rule can be specified. Specifying a PIN validation rule is highly recommended to avoid wasting cards due to repeated entering of an incorrect PIN.

PIN[OUTPUT]:TARGET_PIN_DESCRIPTION_FIELD;TRANSPORT_PIN_FIELD;VALIDATION_RULE;OLD_VALUE_OUTPUT

PIN[OUTPUT,OLD_VALUE_OUTPUT]:TARGET_PIN_DESCRIPTION_FIELD;VALIDATION_RULE;TRANSPORT_PIN_FIELD

Also, you can now specify the format of the output variables to be something other than a hex string, if desired.

For example:

This custom format allows for calculating a response to a challenge based on a given key (see GET CHALLENGE / EXTERNAL AUTHENTICATION commands in the CardOS firmware docs).

It supports three C/R algorithms, none of which use any padding, so make sure the input has the proper size:

The format in an APDU script looks as follows:

CR[OUTPUT]:ALGORITHM;KEY;CHALLENGE

For example:

A suitable challenge can be acquired as follows:

DYN[CHALLENGE]:00840000;;16 # get 16 bytes challenge, store in CHALLENGE var as hex

Each challenge is valid within the same session until it is used by an authentication command or replaced with a new challenge.

Since Smart ID 20.11, response data can be returned as UTF-8 string or base64 string instead of hex, so you do not have to do such conversion in the process anymore.

Refer to section "Configure format for variables" for details.

Read version and patch

# this is an APDU script
 
RAW[CARDOS_VERSION]:00CA018202  # read CardOS version into field CARDOS_VERSION
DYN[PACKAGE_INFO]:00CA0188;;255 # read package info into field PACKAGE_INFO

Write ef gdo (Elementary File Global Data Object)

# this is an APDU script (written for a specific card profile, yours may vary)
 
RAW:00A4080C022F02                        # select EF GDO file
DYN:00D60000;HELLO+CARDOS_VERSION+WORLD;  # write values of fields HELLO, CARDOS_VERSION
                                          # and WORLD (concatenated) to selected file

Change ma key

# this is an APDU script (written for a specific card profile, yours may vary)
# this changes the 3DES key with ID 8
# from the default FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 
# to the value of the NEW_KEY field
 
DYN[CHALLENGE]:00840000;;16              # get 16 bytes challenge
CR[RESPONSE]:MAC_DES3;0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF;CHALLENGE # calc
                                                                                   # response
DYN:008200 08;RESPONSE;                # EXTERNAL AUTHENTICATE APDU for keyId 8
DYN:902410 08;0x8F18+NEW_KEY           # change key with keyId 8 to NEW_KEY with options 8F18

These are example encoding using the script examples above (set the "read" flag on CARDOS_VERSION, PACKAGE_VERSION and APDU_RESPONSE_CODES_*, as those provide output. The Application_X section represents an application, that is, one part of the chip that should be encoded in a certain way.

1. Define like this is the encoding description:
   

   [Encoding]
   Type=1024,Chip
   Devices=8710
    
   [Fields]
   APDU_RESPONSE_CODES_A=
   APDU_RESPONSE_CODES_B=
   APDU_RESPONSE_CODES_C=
   NEW_KEY=
   HELLO=
   WORLD=
   CARDOS_VERSION=
   PACKAGE_INFO=
    
   [Description]
   PKCS11LibraryWindows32=cardos11.dll
   PKCS11LibraryWindows64=cardos11_64.dll
   ApplicationList=ABC
    
   [Application_A]
   ApduFile=read_version_and_patch.apdu
   ApduResponseCodesField=APDU_RESPONSE_CODES_A
    
   [Application_B]
   ApduFile=write_ef_gdo.apdu
   ApduResponseCodesField=APDU_RESPONSE_CODES_B
    
   [Application_C]
   ApduFile=change_ma_key.apdu
   ApduResponseCodesField=APDU_RESPONSE_CODES_C

2. Specify the correct order in ApplicationList=, especially if one script depends on the output of another.

3. It is optional to set the ApduResponseCodesField for execution, but it is needed if you want to process the result code data.
   Result code data uses the following format:
   
   

   hexResponseCodeOfFirst;hexResponseCodeOfSecond;etc.

   For example, these are the values if all scripts in the above encoding returned code 0x9000:

   APDU_RESPONSE_CODES_A

   9000;

   APDU_RESPONSE_CODES_B

   9000;9000;

   There is no response code for the CR command from the third script, as it does not execute an APDU:

   APDU_RESPONSE_CODES_C

   9000;;9000;9000;