/
Automatically distribute Card SDK configuration

Automatically distribute Card SDK configuration

This article describes how to distribute common hardware settings to multiple Nexus Card SDK clients, by using the cms.ini file and silent installation. 

  • Card SDK installed on one client with Configuration Manager for setting up hardware, see Install Card SDK

Step-by-step instruction

  1. Set up any needed hardware, for example for printers, readers, encoders, cameras, signature pads. For more information, see Configure Card SDK

    The hardware configuration is stored in the following file: 

    cms.ini file

    C:\ProgramData\cms\cms.ini





To distribute the hardware settings to multiple clients:

  1. Copy the cms.ini file to the c:\programData folder for software distribution.



Related content

Install Card SDK
Install Card SDK
More like this
Initial setup of Configuration Manager
Initial setup of Configuration Manager
More like this
Administration
Administration
More like this
Nexus Card SDK
Nexus Card SDK
More like this
Card SDK requirements and interoperability
Card SDK requirements and interoperability
More like this
Define card type
Define card type
More like this

Copyright 2024 Technology Nexus Secured Business Solutions AB. All rights reserved.
Contact Nexus | https://www.nexusgroup.com | Disclaimer | Terms & Conditions