This article includes updates for CM 8.10.

This article describes how to revoke a Certificate Authority (CA) in Smart ID Certificate Manager (CM).

This task is done in Administrator's workbench (AWB).

A CA with an external issuer can be set as revoked with the Externally Revoked Authority command from the Tools menu. This will only change the state of the CA in the database, the actual CRL is issued by the external issuer. However, a CA must be set as revoked to be able to remove its key.

Prerequisites

The following prerequisites apply:

Two administration officers must sign the request.
Both officers must have the following roles:
- Use AWB
- CA and Key tasks
A connection to the CM host must have been established. See Connect to a Certificate Manager host.

Revoke CA

In AWB, select the CA/SA to be revoked by highlighting it.
Select Tools > Revoke Authority and select the revocation reason from the sub-menu.
In the Signature dialog box, enter the PIN code. See Sign tasks in Certificate Manager for more information.

Revocation reasons

The available revocation reasons depends on the type of CA/SA and the current state of the CA/SA. The following table shows the available reasons and how a reason can be changed.

Current CA state and type	New state or reasons
Active CA	All reasons except On Hold
Active CA with external key	All reasons including On Hold
On Hold CA with external key	Reinstate or all reasons except On Hold
Revoked CA, Affiliation Changed, Superseded or Cessation of Operation	Key-, CA- or AA Compromise
Revoked CA, CA- or AA Compromise	Key Compromise
Revoked CA, Key Compromise	None

The On Hold reason can only be set on a CA with external key.

Not all reason codes are available for Signing Authorities, for example, CaCompromise and AACompromise.

Nexus Documentation

Revoke CA in Certificate Manager

Prerequisites

Revoke CA

Revocation reasons

Additional information