Document toolboxDocument toolbox

Nexus Documentation
CURL vulnerability information (CVE-2023-38545) - Nexus awareness advisory on Microsoft's update KB5014754

Create publication procedure in Certificate Manager

Owned by Ann Base (Deactivated)
Last updated: Apr 09, 2024 by Ylva AnderssonVersion comment
2 min read

This article is valid for Certificate Manager 8.4 and later.

This article describes how to create a publication procedure that defines the parameters to be used when publishing certificates using the Certificate Controller (CC) in Certificate Manager (CM).

This task is done in the Administrator's workbench (AWB) in Certificate Manager.

Prerequisites

The following prerequisites apply:

  • Two administration officers must sign the request.

  • Both officers must have the following roles:

    • Use AWB

    • Policy tasks

  • A connection to the CM host must have been established (see Connect to a Certificate Manager host).

  • The following information is required by the administration officer during the task:

    • The procedure name that will appear in the explorer bar

    • The publication format to be used

    • The distribution rules to be used

It is recommended that formats, which are not available, be generated before performing this task.

Create publication procedure

Clicking Save at any time during the creation of the publication procedure, before clicking OK, will save the data and place the incomplete procedure definition in the Publication procedures sub-group.

To complete the creation of the publication procedure at a later stage:

  • Highlight the procedure in the explorer bar.

  • Select Modify from the Edit menu, the toolbar, or the right-click shortcut menu.

To create a publication procedure:

  1. In AWB, select New > Publication procedure.

  2. In the Create Publication Procedure Request dialog, enter the Procedure name that should appear in the Publication procedures sub-group in the explorer bar. This field is mandatory.

  3. Select Domain and check Visible in subdomain if applicable.

  4. Click the Publication format browse button and select publication format. This field is mandatory.

  6. In Distribution rules, click + and add a distribution rule. Add all relevant distribution rules.

  7. Click OK and sign the task. See Sign tasks in Certificate Manager for more information.

Related information

Copyright 2024 Technology Nexus Secured Business Solutions AB. All rights reserved.
Contact Nexus | https://www.nexusgroup.com | Disclaimer | Terms & Conditions