Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

  1. Mailhog is a tool that can be used when testing sending emails with the Smart ID components Digital Access and Identity Manager.

    Useful commands

    Start mailhog
    <SMARTIDHOME>/tools/mailhog/docker-compose up -d
    Stop mailhog
    <SMARTIDHOME>/tools/mailhog/docker-compose stop
    Mailhog logs
    <SMARTIDHOME>/tools/mailhog/docker-compose logs -f

    Change mailhog ports

    1. Edit <SMARTIDHOME>/tools/mailhog/docker-compose.yml and change the ports to the left of the colons. Restart the container to apply the changes

      Change ports
          ports:
            - 1025:1025 # smtp server
            - 8025:8025 # web ui
    2. Configure your Smart ID component with the following settings if mailhog is deployed to the same host as the component. If mailhog is deployed to another host, replace the SMTP host with the hostname/ip address, and make sure that the Smart ID host can access mailhog on port 1025.

      SMTP Host: mailhog
      SMTP Port: 1025
      Sender: test@example.com
       Example for Identity Manager
      1. Log in to Identity Manager Operator.
      2. Go to the Admin page.
      3. Click Configure system properties.
      4. Click SMPT Settings.
      5. Enter port number 1025.
    3.  Access the web interface to see emails. Browse to the host where mailhog is deployed on port 8025.

      Access emails
      http://SMARTID-HOST>:8025

This article is valid for Smart ID 21.04 and later.

  • No labels