To see the deployment requirements for Digital Access component, go here.

1. Go to the Nexus Support portal. Find Digital Access component and the latest release.

2. Open the appliance folder. 
   

3. For Hyper-V, download:

   • appliance file: access-gateway.zip

   • digest file: access-gateway-digests.txt 

4. For VMware, Virtual Box or other virtualization platforms, download:

   • appliance file: access-gateway.ova

   • digest file: access-gateway-digests.txt

1. In the command-line interface, navigate to the search path where the files are stored.

2. Verify the checksum for the .zip file or the .ova file with the shasum command:

   Example

   $ shasum access-gateway.ova 
   bdc2a093caef0c0589325d6f509c1b19de1e36d7 access-gateway.ova

   


3. Compare the result with the digest file with the grep command.

   Example

   $ grep bdc2a093caef0c0589325d6f509c1b19de1e36d7 access-gateway-digests.txt 
   bdc2a093caef0c0589325d6f509c1b19de1e36d7   access-gateway.ova 

4. If you are on a Windows machine, you can also check the digest using PowerShell, with the Get-FileHash command:

   PowerShell example

   PS> Get-FileHash -Algorithm SHA1 .\access-gateway.ova 
   
   Algorithm   Hash                                       Path
   ---------   ----                                       ----
   SHA1        bdc2a093caef0c0589325d6f509c1b19de1e36d7   C:\Users\joachim.kessel\
   Downloads\access-gateway.ova

1. In the virtualization platform, import the appliance file.
2. Check the network settings, and modify them if needed.
3. Start the appliance, it boots. 

1. Log in with the agadmin user. Since this is the first time you log in, you must set the password:

   Example: Log in with agadmin user

   ag-appliance login: agadmin
You are required to change your password immediately (root enforced)
Enter new UNIX password:
Retype new UNIX password:

   The license agreement is shown.

2. Press any key to continue. The console menu opens.

The first time you log in you need to do some basic settings, for example set network parameters for the network adapter, and time settings.

1. In the console menu, choose Setup system > Modify interfaces > [select adapter] 
2. Either use DHCP or set up the IP address, netmask and default gateway manually:
   1. modify IP
   2. Enter the IP address, received from the IT department. Return.
   3. Check the netmask and default gateway. Modify if needed.
   4. Save
      
3. Optional: Modify hostname.
4. Modify DNS, received from the IT department.
5. Return to main menu.