Document toolboxDocument toolbox

Import items to Certificate Manager

This article describes how to import items from a file, previously exported from another Smart ID Certificate Manager (CM) system. This task is done in the Administrator's workbench (AWB).

Prerequisites

Step-by-step instruction

Import items to Certificate Manager

  1. In AWB, select File > Import tree.

  2. In the Import tree dialog box, browse to the file containing the exported items.

The CM system that was used to export the file should be of the same version as the CM that you import to.

  1. Select the items you want to import.

  2. Enter a Name prefix if you want the names of all the items you import to start with this value. This is recommended as it makes the imported items more visible.

  3. Click Finish to start the import.

Import limitations

  • Format files must be copied separately.

  • All imported items are unsigned. They must be signed by one or two officers before they can be used. Note that it is only possible to delete unsigned items from a CM system.

  • It is not possible to import the same item several times. If any of the selected items to import are already in the system, a message box is displayed with the name of the items that cannot be imported again.

  • As the certificate associated with an officer is not exported or imported with the officer record, the certificate is marked as invalid. The officer must be modified and the certificate replaced with one existing in the importing machine.

Additional information

Copyright 2024 Technology Nexus Secured Business Solutions AB. All rights reserved.
Contact Nexus | https://www.nexusgroup.com | Disclaimer | Terms & Conditions