Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

This article describes how to distribute common hardware settings to multiple Nexus Card SDK clients, by using the cms.ini file and silent installation. 


Prerequisites

 Prerequisites
  • Card SDK installed on one client with Configuration Manager for setting up hardware, see Install Card SDK

Step-by-step instruction

 Set up hardware configurations
  1. Set up any needed hardware, for example for printers, readers, encoders, cameras, signature pads. For more information, see Configure Card SDK

    The hardware configuration is stored in the following file: 

    cms.ini file
    C:\ProgramData\cms\cms.ini
 Distribute hardware settings to multiple clients

To distribute the hardware settings to multiple clients:

  1. Copy the cms.ini file to the c:\programData folder for software distribution.
  • No labels