Document toolboxDocument toolbox

Enroll profile

This article describes how a Workplace certificate agent enrolls a profile in the Workplace package in Smart ID Identity Manager.

Prerequisites

A certificate profile must have been created and be in the state "active". See Create certificate profile.

Step-by-step instruction

Enroll profile

  1. In Identity Manager Operator, go to the Search page and select Workplace certificate profiles from the drop-down list.

  2. Click Search to get a list of certificate profiles, and select the active profile that you want to enroll.

  3. Select Enroll profile. For the selected enrollment protocol, follow the instructions below:

Enroll P10 profile

  1. In Upload CSR, click to search for and upload the certificate signing request (CSR) file.

  2. Click Next.

  3. Edit the server request.

  4. Click Download to download the P10 certificate. The P10 certificate is related to the asset or to the certificate profile.

  5. Click Next to proceed with the process or Cancel to close the process.

Enroll P12 profile

  1. Click Search asset and select an existing asset or create an asset. For more information, see Create asset.

  2. Click Next to proceed with the process or Cancel to close the process.

  3. Enter data in the fields under Certificate data,

  4. Click Next. 

  5. In Certificate password, do the following:

    • Click the download icon to download the certificate to your system.

    • Enter password and select the Confirm displayed password checkbox to confirm the password conditions. The password cannot be stored or retrieved. 

  6. Click Next.

  7. In Confirm certificate installation, click Confirm to confirm the installation. 

  1. Enter data in the fields under Certificate profile data.

  2. Enter data in the fields under Certificate data.

  3. Enter the domain name in the DNS field. If more than one DNS entry is required, the entries must be comma-separated.

  4. Click Next to proceed with the process or Cancel to close the process. 

  5. In Certificate password, do the following:

    • Click the download icon to download the certificate to your system.

    • Enter password and select the Confirm displayed password checkbox to confirm the password conditions. The password cannot be stored or retrieved. 

  6. Click Next.

  7. In Confirm certificate installation, click Confirm to confirm the installation. 

Enroll ACME profile

  1. Enter data in the fields under Certificate data.

  2. Click Next to proceed with the process or Cancel to close the process. 

Enroll SCEP profile

Approvals



Use case details



Related information

Copyright 2024 Technology Nexus Secured Business Solutions AB. All rights reserved.
Contact Nexus | https://www.nexusgroup.com | Disclaimer | Terms & Conditions