Document toolboxDocument toolbox

Nexus Documentation
CURL vulnerability information (CVE-2023-38545) - Nexus awareness advisory on Microsoft's update KB5014754

Administration service in Digital Access, set up internal and external communication

Owned by Former user (Deleted)
Last updated: Dec 18, 2023 by Josefin Klang (Deactivated)
2 min read

This article describes the administration service in Smart ID Digital Access component. 


Digital Access is a complete network of services, with the administration service as the natural connecting point, or hub. The administrator manages all configuration of Digital Access on the administration service through Digital Access Admin.

The administration service distributes your User accounts in Digital Access settings to the User storage in Digital Access and configuration changes to the Digital Access network: the access point, policy service, distribution service, and authentication service.  You can only configure one administration service server per Digital Access network.

When initially setting up Digital Access through the Setup system wizard, the administration service by default listens to host 127.0.0.1 and port 8300 for communication within the Digital Access network. These default values can be changed.

The administration service must be set up with:

  • Internal communication, that is, the communication between the administration service and the Digital Access network.

  • External communication, that is, the communication between the administration clients and the administration service.



-

Step-by-step instructions

  1. Log in to Digital Access Admin with an administrator account.



  1. In Digital Access Admin, go to Manage System.

  2. Click Administration Service.

  3. In the Internal Host input field, enter IP address or DNS name of the host for internal traffic in the Digital Access network.

  4. In the Internal Communication Port input field, enter the port for internal traffic in the Digital Access network.



  1. In Digital Access Admin, go to Manage System.

  2. Click Administration Service.

  3. In the the HTTP Host and HTTP Port input fields, enter IP address or DNS name and port number of the host for HTTP traffic.

  4. In the the HTTPS Host and HTTPS Port input fields, enter IP address or DNS name and port number of the host for HTTPS traffic.

  5. In the Server Ceritificate input field, enter the server certificate the administration service uses in HTTPS communication.



Related information

Copyright 2024 Technology Nexus Secured Business Solutions AB. All rights reserved.
Contact Nexus | https://www.nexusgroup.com | Disclaimer | Terms & Conditions