This article describes how to manually trigger building of a Certificate Issuing List (CIL) within Smart ID Certificate Manager (CM). This task is done in the Administrator's workbench (AWB).

Prerequisites

The following prerequisites apply:

• An administration officer must sign the request.

• The officer must have the following roles:

  • Use AWB

  • Manual build of CRL and CIL

• A connection to the CM host must have been established. See Connect to a Certificate Manager host.

• A CIL procedure must be available (see Create CIL procedure in Certificate Manager)

Build CIL

1. In AWB, select Tools > Build CIL.
   A list of all available signed CIL procedures is shown.

2. Select which CIL procedure to use for this CIL.

3. The Signature dialog box appears.

4. Select the officer certificate and enter the PIN code for the key.

5. Click OK.

Related information

• Administrator's workbench (AWB)

• Administration tasks in Certificate Manager

• CA administration tasks in Certificate Manager

• Connect to a Certificate Manager host

• Create CIL procedure in Certificate Manager

• Smart ID Certificate Manager

• CA policy tasks in Certificate Manager