Hardware requirements for Certificate Manager
- Karolin Hemmingsson (Unlicensed)
- Josefin Klang (Deactivated)
This article describes the hardware, on which to install the Smart ID Certificate Manager (CM) system. The hardware shall correspond to one of the typical configurations described in Recommended setup of Certificate Manager.
More details about hardware requirements and interoperability can be found in BACKUP - Certificate Manager requirements and interoperability.
CM clients
Client | Requirement |
|---|---|
Administrator's workbench (AWB) | 2 smart card readers |
Certificate Controller (CC) | 1 smart card reader |
Registration Authority (RA) | 2 smart card readers or 1 smart card reader and 1 smart card printer |
Secure Printer (SP) | 1 smart card reader and 1 printer to print PIN letters |
Protocol Gateway | A Servlet engine, for example, Tomcat, supporting Java Servlet Specification 3.1 |
CM Web Services (CM WS) | A Servlet engine, for example, Tomcat, supporting Java Servlet Specification 3.1 |
CM server
Server | Requirement |
|---|---|
CIS | 1 Hardware Security Module is recommended to protect the CA keys and to sign certificates produced by the CIS. |
In order to improve availability and performance, a Certificate Issuing System (CIS) can be equipped with more than one HSM. See BACKUP - Certificate Manager requirements and interoperability for a list of supported HSMs. Each supported HSM has its individual installation described in the associated manuals from the manufacturers.
Copyright 2024 Technology Nexus Secured Business Solutions AB. All rights reserved.
Contact Nexus | https://www.nexusgroup.com | Disclaimer | Terms & Conditions